Wet look sealer provides a hard wearing .attractive satin finish ,that can intensify natural colours and offers high grade stain protection

Why to use premium grade sealer

There are several good reasons to seal your masonry products may be it concrete, pathways, pavers, natural stones, artificial stones, composite stones etc.

Sealers ensure that the surface covering lasts for a very long time. Since they are constantly exposed to the elements, they will need regular cleaning, protection and maintenance.

Sealing masonry products assists in safeguarding the surface from the damage it faces from weathering, grime, mould and dirt. It helps repel particles that may stain the surface like oil, red wine and whatever you end up throwing at it.

It prevents weeds, moss and grass from growing in joints whilst deterring for ants and insects.

Sealers create a protective finish that enhances the colour and texture of masonry surface

Wet and seal sealer is the most effective way to keep your masonry surface keeping clean and wet look..

Ideally, you should seal the masonry surface as soon as the project is completed.

Product Introduction

Wet and seal is a durable water based sealer designed to give the surface that deepened “Wet Look” appearance.

It is a clear acrylic nanoparticle finish designed to protect and beautify slate, concrete, flagstone, quarry tile and other masonry surfaces

Wet and seal wet look sealer is made from acrylic nano particles. wet and seal penetrates deeply in to the masonry products such as pavers, concrete, bricks, stones thus reducing oil and dirt penetration  .

Also it protects surface from the corrosion and de icing salts.

Wet and seal wet look sealer contains Uv stabilizers to reduce UV rays effect and greying effects 

Uses

Wet and seal sealer can be used for properly prepared interior or exterior masonry surfaces such

             Concrete                                    Stucco

             Bricks                                         Unglazed tiles 

            Concrete Aggregate                   Natural stones

            Artificial stones                          Pavers 

Salient Features

Deepened wet look appearance

Water base formula to offer long lasting life

Medium sheen / film forming Resist oil, grease and food stains

Non-yellowing and UV resistant

Efflorescence resistant

Low VOC

Easy to clean and maintain

To be used for unsealed surface only.

Gloss finish. Breathable formulation

Looks surface wet but non slippery.

Increases aesthetic appearance

Application Procedure

Clean the surface thoroughly prior to application by water

Apply by brush, roller or spray.

Use one or two layers as required

Apply first coat. Let it dry for 6 hours and then apply second coat.

ALWAYS TEST the product on a small hidden area of approximately 4 sq. ft. (0.4 sq. m.) to ensure the results will meet your expectations

Do not wet after applied for 48 hours. Ensure that there are no rains for 48 hours.



Physical and chemical properties



Precautions

Avoid heavy traffic for 48 hours

Keep out of reach of children and oxidising agents

Product is irritating to hands and skin and eyes.

If contact happens with skin and eyes wash with plenty of water.

If swallowed call doctor immediately.

Not for human consumption.

To be used as raw material for construction industry only.



Disclaimer

Data presented in this document is in good faith and accurate and best to our

Knowledge. Data is submitted for information purposes only without warranty

Whatsoever. We do not accept any responsibility or liability which may result

From the use of this product. This is due to the nature and application of this

Product. The use and handling etc. of this product are beyond our control.

Hence, we do not accept any responsibility and liability